Uluhlu lwepeyinti yesando esekwe emanzini ngamacangci epeyinti yeorenji

Ipateni yehamile esekwe emanzini ityatile ipateni yepeyinti e-orenji uluhlu lwepeyinti ebonakalayo

inkcazelo emfutshane:

Olu luhlu lweemveliso zenzelwe ngokukodwa oomatshini kunye nezixhobo.I-primer yenziwe ngepeyinti ye-epoxy resin yamanzi, kwaye i-topcoat yenziwe ngepeyinti ye-epoxy resin yamanzi okanye i-polyurethane topcoat.Idyasi yangaphezulu inesando esifana nesiphumo sepateni e-orenji.
Ukuthelekisa ukusebenza
Ukumelana nobushushu obuphezulu kunye nomgangatho ophantsi wokutshintsha ubushushu kunye nokubanda, ukumelana nokuguga, ukuxhathisa kweoli, ukuxhathisa imichiza;
Ukumelana ne-Yellowing, ubunzima obuphezulu, i-gloss elungileyo, kwaye inokunyangwa ngaphandle ixesha elide ngaphandle kokuguqulwa kwebala kunye nomgubo;
Umphumo wepatheni yesando edibeneyo icacile kwaye i-dimensional-dimensional.

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

Ubungakanani besicelo

Ilungele ukugquma komhlaba wezixhobo ezahlukeneyo zetsimbi zangaphakathi nangaphandle, kwaye isetyenziselwa ngokukhethekileyo ukukhuselwa kwe-anti-corrosion kunye nokuhombisa iindawo zetsimbi ezifana nezixhobo zoomatshini kunye nombane, iinqwelomoya, izixhobo, iifeni zombane, iithoyi, iibhayisekile, kunye nezixhobo zemoto.

unyango olungaphezulu

Ipateni yesando esekwe emanzini amacangci epeyinti yepeyinti eorenji (4)

Yonke imiphezulu eza kugqunywa kufuneka ingabi naoli nothuli, kwaye kufuneka igcinwe icocekile, yomile kwaye ingangcoliseki.Ifilimu yepeyinti endala kufuneka ichithwe ngokupheleleyo yi-thinner, kwaye i-primers kunye ne-putty akufanele ifafazwe ukugubungela.Yonke imiphezulu kufuneka ivavanywe kwaye iphathwe ngokwe ISO8504:1992.

Imiyalelo yokwakha

(1) Ingubo kufuneka ixutywe ngokupheleleyo kwaye ixutywe ngokulinganayo;i-agent yokunyanga ephantsi kunye nomphezulu kufuneka isetyenziswe ngokuchanekileyo kwaye umlinganiselo kufuneka uchaneke;
(2) Ipeyinti yomatshini ifuna ubukhulu befilimu yexesha elinye.Ukufezekisa iglosi engcono, kungcono ukusebenzisa uhlobo olungenamoya oluncediswa ngumoya kunye ne-atomization elungileyo.
fafaza, okanye ufuna izitshizi ezininzi.
(3) Ifilimu yepeyinti inokomiswa ngokwayo okanye kwiqondo lokushisa eliphantsi, ubunzima befilimu yepeyinti eyomileyo iphezulu, kwaye umphumo wephethini yesando edibeneyo ingcono;
(4) I-epoxy okanye i-polyurethane inokukhethwa kwisixhobo sangaphakathi, kwaye i-polyurethane kufuneka isetyenziswe kwizixhobo zangaphandle;
(5) Emva kokutshiza, izixhobo kufuneka zihlanjululwe nge-diluent ngexesha, ngaphandle koko umpu wokutshiza awukwazi ukusetyenziswa.

Iphakheji ecetyiswayo

I-Primer FL-213D / i-epoxy esekelwe emanzini i-primer ye-1 ixesha
I-Topcoat FL-133M yamanzi esekelwe kwi-polyurethane topcoat (ipateni / ipateni yesando / ipateni ye-orenji) / 213M i-epoxy topcoat yamanzi (ipateni ye-corrugated / isando / i-orenji) amaxesha angama-1-2, ubukhulu obuhambelanayo abukho ngaphantsi kwe-150um.
Umgangatho woLawulo: HG/T5176-2017

Ukuxhasa iiparamitha zobugcisa bokwakha

Iglosi	Iglosi ephezulu (idyasi ephezulu)
Umbala	bhekisa kwikhadi lombala we-wind chime tree okanye ngokwesampulu
Isiqulatho esiqinileyo sevolumu	40%±2
Ireyithi yokwaleka ithiyori	8m²/L (ifilimu eyomileyo iimicrons ezingama-50)
Ubunzima obuthile	primer 1.3kg/L, topcoat 1.15kg/L
Umphezulu owomileyo (50% ukufuma)	15℃≤2h, 25℃≤1h, 35℃≤0.5h
Ukusebenza nzima (ukufuma 50%)	15℃≤12h, 25℃≤8h, 35℃≤5h
Ixesha lokuhlaziya	Ubuncinci obucetyiswayo be-24h;ubuninzi obungenasiphelo (25℃)
Ukunyanga ngokupheleleyo	7d (25℃)
Ukuqina	1-2H
Ukuncamathela	IBanga loku-1
Ukumelana nokothuka	50kg.cm
Ixesha lokusebenzisa elixutywe	4h (25℃)