Isakhiwo sentsimbi esekwe ngamanzi enzima-umsebenzi onzima wokulwa ne-corrosion topcoat series

Isakhiwo sentsimbi esekwe ngamanzi enzima-umsebenzi ochasene ne-corrosion topcoat series Featured Image

inkcazelo emfutshane:

Olu luhlu lweemveliso luyilelwe ngokukodwa ukuxhatshazwa kwe-heavy-duty anti-corrosion.Yenziwe nge-polyurethane resin esekelwe emanzini, i-fluorocarbon resin esekelwe emanzini kunye ne-pigment esebenzayo kunye ne-isocyanate yokunyanga i-agent.

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

Ukuthelekisa ukusebenza

Ikhono eligqwesileyo lokuchasana ne-corrosion ukuhlangabezana neemfuno zokukhusela zengubo yonke;
Ukusebenzisa amanzi njengendlela yokusabalalisa, akukho zixhobo ezinobuthi kunye neziyingozi eziveliswayo ngexesha lokwakha kunye nenkqubo yokugqoka ifilimu;
Ukunyangwa kwamacandelo amabini, ubunzima obuhle, ukubambelela kakuhle, ukuxhathisa imichiza, ukuqina kweminyaka engaphezu kwe-10.Iglosi elungileyo kunye nokugcinwa kombala.

Uluhlu lwesicelo

Ulwakhiwo lwentsimbi esekwe emanzini enzima-umsebenzi onzima wokuchasana nomhlwa i-topcoat serie (

Ifanelekile kwizakhiwo ezahlukeneyo zentsimbi, iinqanawa, izixhobo zoomatshini, iibhulorho, izikhululo zeenqwelo moya, iitanki zeoyile, imibhobho yeoli kunye nofakelo olunobume oburhabaxa kunye neemfuno zokusebenza eziphezulu zokuchasana nomhlwa.

Unyango lomphezulu

Olu chungechunge lweemveliso kufuneka lusetyenziswe kwi-primer okanye i-coating ephakathi, kwaye i-substrate ayinayo ioli kunye nothuli.Ukuba kukho i-rust, kufuneka iphathwe nge-primer ngaphambi kokufaka i-topcoat.

Inkcazo yokwakha

Uxinzelelo oluphezulu lokutshiza okungenamoya luyacetyiswa ukuba ufumane iyunifomu kunye nefilimu elungileyo.
Hlanganisa ngokulinganayo ngokomlinganiselo.Ukuba i-viscosity inzima kakhulu, inokuhlanjululwa ngamanzi kwi-viscosity yokwakha.Ukuze kuqinisekiswe umgangatho wefilimu yepeyinti, sincoma ukuba isixa se-dilution yi-0% -5% yobunzima bepeyinti yokuqala.
Ukufuma okunxulumeneyo kungaphantsi kwe-85%, kwaye iqondo lobushushu bomhlaba wokwakha likhulu kune-10°C kwaye likhulu kuneqondo lombethe nge-3°C.

Isakhiwo sentsimbi esekwe ngamanzi ngumsebenzi onzima wokuchasana nomhlwa ( (3)

Iiphakheji ezicetyiswayo

Primer FL-128D/133D amanzi-based inorganic epoxy zinc-rich 1-2 amaxesha
Ipeyinti ephakathi FL-123Z esekwe ngamanzi epoxy micaceous iron ipeyinti ephakathi ixesha eli-1
Topcoat FL-139M/168M amanzi-based polyurethane/fluorocarbon topcoat 2 amaxesha, ukuthelekisa ubukhulu hayi ngaphantsi kwe 250μm

Umgangatho olawulayo

HG/T5176-2017

Ukuxhasa iiparamitha zobugcisa bokwakha

Iglosi	Iglosi ephezulu
Umbala	bhekisa kwikhadi lombala elikumgangatho wesizwe womthi wetshime yomoya
Isiqulatho esiqinileyo sevolumu	40%±2
Ireyithi yokwaleka ithiyori	8m²/L (ifilimu eyomileyo iimicrons ezingama-50)
Ubunzima obuthile	1.20kg/L
Umphezulu owomileyo (50% ukufuma)	15℃≤1h, 25℃≤0.5h, 35℃≤0.1h
Ukusebenza nzima (50% ukufuma)	15℃≤10h, 25℃≤5h, 35℃≤3h
Ixesha lokuhlaziya	Ubuncinci obucetyiswayo be-24h;ubuninzi obungenasiphelo (25℃)
Ukunyanga ngokupheleleyo	7d (25℃)
Ukuqina	1H
Ukuncamathela	IBanga loku-1
Ukumelana nokothuka	50kg.cm
Ixesha lokusebenzisa elixutywe	6h (25℃)